| |
Question:
How do I talk and control the PathFindIR?
Answer:
The PathFindIR requires LIN Bus communication protocol. The command sets that FLIR can provide are based upon serial communications and are limited (2x zoom, polarity, invert, revert, color palettes). The user must obtain a serial to LIN converter (not supplied by FLIR) and use the command sets found in the ICD. Also, FLIR does not currently make any other cables for connection into the remaining pins found on the PathFindIR. The client must make a custom cable set to tap into the communication pins and/or digital pins and connect this to the serial to LIN converter. FLIR cannot support warranty claims resulting from damage caused by an improperly sealed cable. The standard system cable only provides power input and video output.
|
PathFindIR Brochure
